Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2014 >> Accent GLS, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Smart Key Code Saving System Diagnosis) >> DTC P1676: Immobilizer-Smartra Message Error >> Verification of Repair >> Verification of Vehicle Repair

Verification of Vehicle Repair

WARNING: This page is about a different car, the 2014 Hyundai Santa Fe Sport and 2013 Hyundai Santa Fe Sport. However, it is still accessible from the selected car via links, so may be relevant.

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect GDS and check "No. of Key learnt, PCM status and Smart key PCM status.
  2. Select "Diagnostic Trouble Codes (DTC)"  mode and then clear DTC.
  3. Operate the vehicle within the enable condition and monitor the DTC on the GDS.
  4. Are any DTCs present?

    YES 

    • Go to the applicable troubleshooting procedure.

    NO 

    • System is performing to specification at this time.