Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2014 >> Accent GLS, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Cluster Module Diagnosis) >> DTC B1020-52: TPMS Missing Error >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

WARNING: This page is about a different car, the 2014 Hyundai Santa Fe Sport and 2013 Hyundai Santa Fe Sport. However, it is still accessible from the selected car via links, so may be relevant.
Item Detecting Condition Possible Cause
DTC Strategy
  • Check CAN communication
  1. Check option information and performance of cluster
  2. Perform cluster coding procedure
  3. Check TPMS ECU
  4. Check CAN line
  5. Check Cluster
Enable Conditions
  • IG key "ON"
Case 1 Threshold Value
  • TPMS CAN error
DTC Erasing Time
  • In case of correctly performed coding procedure
Case 2 Threshold Value
  • End of line has TPMS option information even though TPMS has not been detected on the CAN BUS
DTC Erasing Time
  • Erased DTC after solved problem
Diagnostic Time
  • 2, 000ms
scientia non olet · About Mike's Workshop Manuals