Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2014 >> Accent GLS, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Transfer Assembly) >> Front Wheel Transfer Assembly >> Repair procedures >> Installation

Repair procedures: Installation

WARNING: This page is about a different car, the 2014 Hyundai Santa Fe Sport and 2013 Hyundai Santa Fe Sport. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install in the reverse order of removal.
    1. Be careful not to damage the O-ring (A). If the O-ring is damaged, replace with a new one.
    2. Smear and cover splines (B) with molybdenum type high pressure grease.

      TECHLUBE MEGAMAX - ALPHA OR EQUIVALENT

      Fig 1: Cover Splines And O-Ring
      G09365330Courtesy of HYUNDAI MOTOR AMERICA
    3. Install the propeller shaft to be near runout marking (Transfer assembly 1ea, propeller shaft 1ea) each other.
      Fig 2: Propeller Shaft Runout Marking
      G09365331Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals