Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2014 >> Accent GLS, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Engine Control System - 2.0L) >> Accelerator Position Sensor (APS) >> Repair procedures >> Installation

Repair procedures: Installation

WARNING: This page is about a different car, the 2014 Hyundai Santa Fe Sport and 2013 Hyundai Santa Fe Sport. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install in the reverse order of removal.

    Accelerator pedal module installation nut: 

    16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18.8 lb-ft)

    Accelerator pedal module installation bolt: 

    8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

scientia non olet · About Mike's Workshop Manuals