Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2013 >> Veloster Turbo, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Fuel Delivery System - Non-Turbo) >> Filler-Neck Assembly >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Installation is reverse of removal.

    Filler-neck assembly bracket installation nut: 

    7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

    Filler-neck assembly installation screw: 

    7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

scientia non olet · About Mike's Workshop Manuals