Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2013 >> Veloster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Lighting System) >> Hazard Lamp Switch >> Repair procedures >> Installation

Repair procedures: Installation

WARNING: This page is about a different car, the 2012 Hyundai Veloster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the heater control module.

    (Refer to the HEATER & A/C CONTROLLER )

scientia non olet · About Mike's Workshop Manuals