Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2013 >> Veloster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Electronic Stability Control (ESC) System) >> ESC OFF Switch >> Repair procedures >> Inspection

Repair procedures: Inspection

WARNING: This page is about a different car, the 2012 Hyundai Veloster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the crash pad lower panel. (Refer to the "CRASH PAD ")
  3. Remove the crash pad side switch assembly (A).
    Fig 1: Identifying Crash Pad Side Switch Assembly
    G08807657Courtesy of HYUNDAI MOTOR AMERICA
  4. Check the continuity between the switch terminals as the ESC OFF switch is engaged.
    Fig 2: Crash Pad Side Switch Terminals Continuity Reference Chart
    G08807658Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals