Removal and Installation

Disconnect the battery negative terminal.
Remove the driver airbag module. (Refer to the AIRBAG MODULE .)
Remove the steering wheel. (Refer to the STEERING COLUMN AND SHAFT .)
Remove the steering wheel cover (A) after loosening the screws.

Fig 1: Identifying Steering Wheel Cover And Screws
Courtesy of HYUNDAI MOTOR CO.
Disconnect the cruise control switch connector (A).

Fig 2: Identifying Cruise Control Switch Connector
Courtesy of HYUNDAI MOTOR CO.
Remove the cruise control switch (A).

Fig 3: Removing Cruise Control Switch
Courtesy of HYUNDAI MOTOR CO.

NOTE: Be careful not to damage the hook when removing the switch.
Installation is reverse order of removal.