Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2013 >> Santa Fe Sport Base, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis - 2.4L (3 Of 3) >> DTC P0630: VIN Not Programmed or Incompatible-ECM/PCM >> System Inspection

System Inspection

  1. Was the PCM just replaced or reflashed?

    YES 

    • Using a scan tool, perform "VIN WRITING" procedure. Refer to the latest Reference manual for scan tool and go to "VERIFICATION OF VEHICLE REPAIR " procedure

    NO 

    • Using a scan tool, read VIN information. If there is no proper VIN information, perform "VIN WRITING" procedure. If VIN information exists, substitute with a known-good PCM and check for proper operation. If the problem is corrected, replace PCM. And go to "VERIFICATION OF VEHICLE REPAIR " procedure.
scientia non olet · About Mike's Workshop Manuals