Exterior Lamp Control

If the key is out and driver door is opened while the key or ACC or IGN ON and tail lamp switch ON, turn the tail lamp relay OFF automatically. When turning tail lamp switch ON again from OFF after the automatic blackout, the tail lamp relay will be turned ON and Tail Lamp Auto Cut function will be cancelled.

If the value of Auto Light Signal is input value of LIGHT ON at the status of IGN1 ON and the auto light switch ON, turn the light ON in 2.5sec ± 100msec.

If the value of Auto Light Signal is LIGHT OFF and the auto light switch ON, turn the light OFF after 5sec.

Turn the front fog lamp ON when pressing the front fog lamp switch when IGN2 ON and Tail Lamp Relay turn ON.

Turn the head lamp relay ON when turning the head lamp switch ON while IGN1 is ON.

Turn the head lamp relay ON for 20 sec when turning the key OFF while the head lamp is ON.

The head lamp relay ON for 30 sec when opening the driver door while the head lamp is ON for 20 sec.

The head lamp relay OFF immediately when pressing the door lock button twice with RKE (or FOB) while the head lamp is ON.

When the driver turns the steering wheel and IGN1 ON and head lamp ON, the static bending light turn ON.

The opposite side lamp is ON when the prohibit R is ON.

The static bending light turn ON for 2 min. at least.

The static bending light turn ON according to the vehicle speed and steering wheel angle.

The head lamp low and tail lamp ON for 15 sec when pressing the door lock button twice with RKE (or FOB) while all doors are closed, locked, the key out and the head lamp switch (or auto light switch) is ON.

If the lock/unlock with RKE (or FOB) or IGN1 & head lamp switch (or auto light switch) OFF while head lamp low and tail lamp ON, the head lamp is OFF.

Turn the turn signal lamp ON when turning the turn signal lamp switch ON and IGN2 ON.

Triple turn signal operates when the turn signal switch OFF before signal lamp operating 3 times.

Turn the hazard lamp ON when turning the hazard lamp switch ON.