Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2013 >> Elantra GT Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Lighting System) >> Front Fog Lamps >> Repair Procedures >> Inspection >> Notes

Repair Procedures: Inspection: Notes

WARNING: This page is about a different car, the 2012 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the lighting switch of the multi-function switch. (Refer to Removal )
  3. With the front fog lamp switch, make sure that continuity exists between the terminals below.

    If continuity is not as specified, replace the multi-function switch.

    Fig 1: Identifying Multi-Function Switch
    G07256863Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About Mike's Workshop Manuals