Repair procedures: Installation

Installation is the reverse of removal.
NOTE:
- When installing, apply the ATF oil or white vaseline to the O-ring (A) not to be damaged.
  
  Fig 1: O-Rings
  Courtesy of HYUNDAI MOTOR AMERICA
- The gasket of the valve body gasket (A) use new one.
  
  Fig 2: Valve Body Gasket
  Courtesy of HYUNDAI MOTOR AMERICA
- Adding automatic transaxle fluid.
  (Refer to "FLUID ")
- Perform TCM learning after replacing the automatic transaxle to prevent slow automatic transaxle response, jerky acceleration and jerky startup.
  (Refer to "REPAIR PROCEDURE " )