Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2013 >> Elantra GS, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Body Control Module (BCM) Diagnosis) >> DTC B1210: Front Left Sensor Fault >> Verification of Repair

Verification of Repair

WARNING: This page is about a different car, the 2014 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect GDS and select "Diagnostic Trouble Codes (DTC)" mode.
  2. Erase the DTCs and Operate the vehicle within DTC Enable conditions in General information.
  3. Is any DTC set again?
    YES 
    • Go to the applicable troubleshooting procedure.
    NO 
    • System performing to specification at this time.
scientia non olet · About Mike's Workshop Manuals