Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2013 >> Elantra GS, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Cluster Module Diagnosis) >> DTC B1602: CAN Error >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

WARNING: This page is about a different car, the 2014 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.
Item Conditions for setting DTC Conditions for setting DTC
DTC Strategy
  • Check CAN communication
  1. CAN High line short to battery/ground
  2. CAN Low line short to battery/ground
  3. CAN High line open/poor connection
  4. CAN Low line open/poor connection
  5. CAN High and Low line short to each other
Enable Conditions
  • IG key "ON"
  • B_CAN communication operating
Threshold Value
  • CAN message is not received
Diagnostic Time
  • 2 sec
DTC Erasing
  • Erased DTC after solved problem
scientia non olet · About Mike's Workshop Manuals