Repair Procedures: Inspection

WARNING: This page is about a different car, the 2014 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.

Stop the engine and uplift the vehicle with lift.
Remove the under cover (A).

Fig 1: Identifying Engine Under Cover

Courtesy of HYUNDAI MOTOR AMERICA

Loosen the oil filler plug (A).

Fig 2: Identifying Oil Filler Plug (A)

Courtesy of HYUNDAI MOTOR AMERICA

Check the oil level.

NOTICE

Oil level must be up to fill the hole, if not, add oil until it runs over.

Fig 3: Locating Oil Level

Courtesy of HYUNDAI MOTOR AMERICA

Install the filler plug.

Tightening Torque:

58.9 ~ 78.5 N.m (6.0 ~ 8.0 kgf.m, 43.4 ~ 57.8 lb-ft)