Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2013 >> Elantra GLS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Manual Transaxle System) >> Manual Transaxle System >> Back-up Lamp Switch >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2014 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the back up lamp switch connector (A).
    2. Fig 1: Back Up Lamp Switch Connector (A)
    G00558258Courtesy of HYUNDAI MOTOR AMERICA
  2. Check the continuity between no. 1 and 2 terminals of backup lamp switch. When the shift lever is in reverse, there should be continuity
    3. Fig 2: Identifying Terminals 1 & 2 Of Back Up Lamp Switch
    G00558259Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals