Rear Wheel Alignment 2013-03-26 ~: Toe
B - A > 0: Toe in (+)
B - A < 0: Toe out (-)
Toe is pre-set at the factory, so it does not need to be adjusted. If the toe is not within the standard value, replace or repair the damaged parts and then inspect again.
Toe:
Total: 0.4°(+0.5°/-0.4°)
Individual: 0.2°(+0.25°/-0.2°)
NOTE:
l L - R l means deviation of the left and right individual toe values.
L: Left toe value
R: Right toe value