Removal and Installation

Disconnect the battery negative terminal.
Tightening torque:

4.0 ~ 6.0 N.m (0.4 ~ 0.6 kgf.m, 3.0 ~ 4.4 lb-ft)
Remove the air-bag module from the steering wheel. (Refer to REMOVAL )
Remove the steering wheel. (Refer to STEERING COLUMN AND SHAFT ")
Remove the rear cover (A) after unfastening the screws.

Fig 1: Rear Cover Screws (1 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA

Fig 2: Rear Cover Screws (2 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA
2013
Remove the cruise control switch (A) after unfastening the screws and disconnecting the switch connector.

Fig 3: Cruise Control Switch 2013
Courtesy of HYUNDAI MOTOR AMERICA

2014

Disconnect the cruise control switch connector (A)

Fig 4: Cruise Control Switch 2014
Courtesy of HYUNDAI MOTOR AMERICA
Remove the cruise control switch (A) after unfastening the screws.

Fig 5: Cruise Control Switch & Screws

Courtesy of HYUNDAI MOTOR AMERICA