Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2012 >> Veracruz GLS, AWD >> Repair and Diagnosis >> General Information >> Specifications Index >> Common Specs & Procedures >> Common Specs & Procedure

Common Specs & Procedure

VERACRUZ COMMON SPECS & PROCEDURE

System Specification/Procedure
Air Conditioning
Service SPECIFICATIONS
Torque Torque values are in the text of the AIR CONDITIONING SYSTEM article.
Axle Nut/Hub Nut
Front 144.7~202.5 Ft. Lbs. (196-274 N.m)
Rear 144.7~202.5 Ft. Lbs. (196-274 N.m)
Battery CHARGING SYSTEM
Brakes
SPECIFICATIONS
Bleeding Sequence BRAKE SYSTEM BLEEDING
Disc Brakes
Service Specifications SPECIFICATIONS
Torque TIGHTENING TORQUES
Charging
Generator CHARGING SYSTEM
Torque N/A
Drive Belts
Routing See "Identifying Drive Belt" figure under REMOVAL
Engine Cooling
General Service Specifications SPECIFICATIONS
Radiator Cap Pressure 14-18 psi
Thermostat R & I THERMOSTAT
Water Pump R & I REMOVAL
Engine Mechanical
Compression COMPRESSION PRESSURE
Oil pressure 18.77 psi at 1000 RPM
Overhaul ENGINE AND TRANSAXLE ASSEMBLY
Torque TIGHTENING TORQUES
Fluid Specifications See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button.
Flywheel/Flex Plate/Drive Plate Torque 52.80 ~ 55.69 Ft. Lbs. (71.54 ~ 75.46 N.m)
Fuel System
Pressure Specification 54.3-55.8 psi
Fuel Pressure Test Procedure FUEL PRESSURE TEST
Fuel Filter Location In fuel pump assembly.
Fuel Filter R & I FUEL PUMP
Ignition
Firing Order & Cylinder Identification 1-2-3-4-5-6 Also see FIRING ORDER & CYLINDER IDENTIFICATION .
Spark Plug
Type NGK - IFR5G-11
Gap 0.0394-0.0433 in. (1.0-1.1 mm)
Torque 15-22 Ft. Lbs. (20-30 N.m)
Starting
Starter STARTING SYSTEM
Torque N/A
Wheel Alignment
Adjustment Specifications WHEEL ALIGNMENT
Torque TIGHTENING TORQUES
Wheel & Tire
Wheel Lug Nut Torque 65-80 Ft. Lbs. (90-110 N.m)