General Information: DTC Detecting Condition

DTC DETECTING CONDITION

Item	Detecting Condition	Possible cause
DTC Strategy	This code detects if the system is in Forced Idle Mode	Faulty APS Faulty APS + Brake Faulty APS + Vehicle speed sensor Faulty APS + Vehicle speed sensor + Brake Faulty ETC Items (TPS or ETC motor etc.) Faulty PCM
Enable Conditions	Ignition "ON"
Threshold value	Forced Idle Mode is active
Diagnosis Time	-
MIL On Condition	1 Driving Cycles

[Tip 1]

If P2104 and P1295 occur at the same time, first check APS and ETC items (TPS or ETC motor etc).
DTC Name
P1295 Throttle Actuator Control System - Power Management