Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2012 >> Veloster Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Charging System) >> Alternator >> Repair Procedures >> Repair Procedures - Turbo >> Reassembly

Repair Procedures - Turbo: Reassembly

WARNING: This page is about a different car, the 2014 Hyundai Veloster and 2013 Hyundai Veloster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Reassemble in the reverse order of disassembly.
    NOTE:
    • When reassembling OAD pulley, replace with new OAD cap.
scientia non olet · About Mike's Workshop Manuals