Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2012 >> Veloster Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Engine Control System - Turbo) >> ETC (Electronic Throttle Control) System Loading >> Repair Procedures >> Inspection >> ETC Motor

ETC Motor

WARNING: This page is about a different car, the 2014 Hyundai Veloster and 2013 Hyundai Veloster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF.
  2. Disconnect the ETC module connector.
  3. Measure resistance between the ETC module terminals 1 and 2.
  4. Check that the resistance is within the specification.

    Specification:  Refer to "SPECIFICATION "

scientia non olet · About Mike's Workshop Manuals