Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2012 >> Tucson GL, Automatic Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control (ESC) System >> Yaw-Rate And Lateral G Sensor >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the floor console.
  3. Disconnect the yaw rate & lateral & Longitudinal G sensor connector (A).
    Fig 1: Locating Yaw Rate & Lateral & Longitudinal G Sensor Connector
    G06874584Courtesy of HYUNDAI MOTOR CO.
  4. Remove the mounting bolts (B).

    Tightening torque: 

    7.9 ~ 10.8 N.m (0.8 ~ 1.1 kgf.m, 5.8 ~ 8.0 lb-ft)

  5. Installation is the reverse of removal.
scientia non olet · About Mike's Workshop Manuals