System States In Virgin Mode
WARNING: This page is about a different variant/trim than selected.
The BES System can be set in 5 different states (OFF LOCKED is not available in virgin mode), depending on the status of the terminals and Engine status:
SYSTEM STATES IN VIRGIN MODE REFERENCE CHART
| System State | Terminal Status | Engine status |
|---|---|---|
| 1. OFF - UNLOCKED | OFF | Stopped |
| 2. ACC | ACC | Stopped |
| 3. IGN | IGN1, IGN2, ACC | Stopped |
| 4. Start | IGN1, START with special pattern of activation. See appropriate service information for details | Cranking |
| 5. IGN - Engine | IGN1, IGN2, ACC | Running |
| (means "self-running") |
Referring to the terminals, the system states described in the table above are same as those one found in a system based on a mechanical ignition switch. The one of distinction with Mechanical-Ignition-Switch based system is that the BES system allows specific transition from [OFF] to [START] without going through [ACC] and [IGN] states.