Repair Procedures: Installation
- Installation is the reverse of removal.CAUTION: After replacement or reinstallation procedure of the valve body assembly, perform procedures below.
- Continue to apply liquid gasket at application points at the valve body cover with ø2.5mm (0.0984in.) thickness.
Liquid gasket Part name:
Threebond 1281B or LOCTITE FMD-546
- Adding automatic transaxle fluid. (Refer to AUTOMATIC TRANSAXLE SYSTEM .)
- Perform TCM learning after replacing the automatic transaxle to prevent slow automatic transaxle response, jerky acceleration and jerky startup. (Refer to Adjustment - TCM Learning).
- Continue to apply liquid gasket at application points at the valve body cover with ø2.5mm (0.0984in.) thickness.