Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2012 >> Santa Fe SE, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Engine Control System - G2.4 DOHC) >> Engine Control Module (ECM) >> Repair procedures >> Installation

Repair procedures: Installation

WARNING: This page is about a different variant/trim than selected.
NOTE: In the case of the vehicle equipped with immobilizer or button engine start system, perform "Key Teaching" procedure together. (Refer to TEACHING PROCEDURES .)
  1. Installation is reverse of removal.

    ECM installation bolt: 

    7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

scientia non olet · About Mike's Workshop Manuals