DTC C2380: ABS/TCS/ESC (ESP) Valve Error: DTC Detecting Condition
DTC DETECTING CONDITION CHART
| Item |
Detecting Condition |
Possible cause |
| DTC Strategy |
|
|
| Enable Conditions |
- If the valve relay is switched ON and corresponding solenoid driver OFF and the voltage of solenoid < 3.5±0.5V continuously for 56ms, the failure is detected.
- If the valve relay is switched ON and corresponding solenoid driver ON and the voltage of solenoid > 1.5±0.5V continuously for 56ms, the failure is detected.
|
| Fail Safe |
- The ABS/EBD/ESC functions are inhibited.
- The ABS/EBD/ESC warning lamps are activated.
|