Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.

Installation is reverse of removal.

CVVT oil control valve installation bolt:

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lbf.ft)

CAUTION: Pay attention to color of valve connector (Component and harness side) when installing. If an OCV is installed on opposite bank, the engine may be damaged.

[Connector Color]

CONNECTOR COLOR CHART

Item	Component Side	Harness Side
Bank1 (RH)	Grey
Bank 2 (LH)	Black