Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2012 >> Genesis 4.6 >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control (ESC) System >> Troubleshooting >> Failure Diagnosis >> ABS Does Not Operate (Intermittently) >> Inspection Procedures >> Notes

Inspection Procedures: Notes

DTC Inspection 

  1. Connect the scan tool with the data link connector and turn the ignition switch ON.
  2. Verify that the normal code is output.
  3. Is the normal code output?

    NO 

    • Check the wheel speed sensor circuit.

    YES 

    Erase the DTC and recheck using scan tool.

scientia non olet · About Mike's Workshop Manuals