Measuring The Anti-pinch Force

Measuring tool: Diameter 25mm, 50mm and 200mm semi-rigid cylindrical bar (10N/mm stiffness)

Measuring method:

• Put the semi-rigid bar described above into the space between the door frame and window edge and measure the pinching force from the point where the bar first contacts with the window.
• There exists no semi-rigid bar measurement tool at present, so that a commonly used measuring tool is employed here. However, a special care should be taken to prevent the measuring tool from moving back and forth, for example, holding the tool by both hands and fix on the glass or on the frame.
• The ECU shall reverse the window before it exerts a pinch force mentioned in the regulation