Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2012 >> Equus Signature >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System Control Module (SRSCM) & Sensors >> Front Impact Sensor (FIS) >> Repair Procedures >> Removal

Repair Procedures: Removal

CAUTION:
  • Removal of the airbag must be performed according to the precautions/procedures described previously.
  • Before disconnecting the front impact sensor connector, disconnect the front airbag connector (s).
  • Do not turn the ignition switch ON and do not connect the battery cable while replacing the front impact sensor.
  1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
  2. Remove the radiator grille upper cover and air duct assembly.
    Fig 1: Identifying Radiator Grille Upper Cover And Air Duct Assembly With Mounting Bolts
    G08830806Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the Front Impact Sensor mounting nut.
    Fig 2: Identifying Front Impact Sensor Mounting Nut
    G08830807Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the Front Impact Sensor connector.
scientia non olet · About Mike's Workshop Manuals