Visual/Physical Inspection

WARNING: This page is about a different car, the 2011 Hyundai Elantra Touring. However, it is still accessible from the selected car via links, so may be relevant.

Check immobilizer lamp circuit.
1. Ignition "ON" & Engine "OFF"
2. Check if immobilizer lamp operates properly.
  NOTE: Right after ignition "ON", Immobilizer lamp lights up for 30 sec. If lamp blinks 5 times after ignition "ON", there's any fault in immobilizer system.
3. Is immobilizer lamp operates properly?

YES

Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

Go to "COMPONENT INSPECTION " procedure.