Component Inspection
- Measure resistance between terminals 1 and 2 of OTS connector. (Component side)
Specification :
TEMPERATURE AND RESISTANCE CHARTTemp. (°C) Temp. (°F) OTS Resistance (kΩ -20 -4 Approx. 14.1 ~ 16.9 0 32 Approx. 6 20 68 Approx. 2.3 ~ 2.6 40 104 Approx. 1.1 ~ 1.2 60 140 Approx. 0.5 ~ 0.6 80 176 Approx. 0.3 - Is resistance within the specification?
YES
- Check for poor connection between PCM and component: backed out terminal, improper mating, broken locks or poor terminal to wire connection. Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO
- Check OTS for contamination, deterioration, or damage. Substitute with a known-good OTS and check for proper operation. If the problem is corrected, replace OTS and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.