Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2011 >> Santa Fe SE, FWD >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> SRSCM (Supplement Restraint System Control Module) >> Seat Track Position Sensor (STPS) >> Repair procedures >> Removal

Repair procedures: Removal

  1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
  2. Remove the front seat assembly. (Refer to FRONT SEAT .)
  3. Loosen the two STPS screws, then remove the STPS after disconnecting the STPS connector.
    Fig 1: Identifying Seat Track Position Sensor (STPS) With Cables
    G06844359Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About Mike's Workshop Manuals