Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2011 >> Santa Fe SE, AWD >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> SRSCM (Supplement Restraint System Control Module) >> Seat Track Position Sensor (STPS) >> Repair procedures >> Installation

Repair procedures: Installation

CAUTION: When installing the harness be sure it does not pinch or interfere with other parts.
  1. Remove the ignition key from the vehicle.
  2. Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
  3. Install the STPS with two screws.
  4. Install the front seat assembly. (Refer to FRONT SEAT .)
  5. Reconnect the battery negative cable.
  6. After installing the Seat Track Position Sensor, confirm proper system operation:
    1. Turn the ignition switch ON, the SRS indicator should be turned on for about six seconds and then go off.
scientia non olet · About Mike's Workshop Manuals