Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2011 >> Genesis 3.8 >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System Control Module >> Troubleshooting for DTC >> DTC B1395: Firing Loops Interconnection Fault >> DTC Detecting Condition

DTC B1395: Firing Loops Interconnection Fault: DTC Detecting Condition

B1395 FIRING LOOPS INTERCONNECTION FAULT

Item Detecting Condition Possible cause
DTC Strategy
  • Check current (PWM type)
  • short circuit in squib harness.
  • SRSCM.
Enable Conditions
  • Ignition "ON"
Threshold Value
  • Squib lines are cross coupled
  • Make other line sink, and one line < 0.6V, then this line is cross-coupled.
Diagnostic Time Qualification
  • More than 2ms x 3
De-Qualification
  • NA
scientia non olet · About Mike's Workshop Manuals