Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2011 >> Azera GLS >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System Control Module (SRSCM) & Sensors >> Front Impact Sensor (FIS) >> Repair Procedures >> Removal

Repair Procedures: Removal

CAUTION:
  • Removal of the airbag must be performed according to the precautions/procedures described previously.
  • Before disconnecting the front impact sensor connector, disconnect the front airbag connector(s).
  • Do not turn the ignition switch ON and do not connect the battery cable while replacing the front impact sensor.
  1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
  2. Disconnect the Front Impact Sensor connector.
  3. Remove the Front Impact Sensor mounting nut.
    Fig 1: Locating Front Impact Sensor Mounting Nuts
    G06801910Courtesy of HYUNDAI MOTOR CO.
  4. Remove the Front Impact Sensor.
scientia non olet · About Mike's Workshop Manuals