Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2010 >> Santa Fe GLS, 2.4 B, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Control System - 3.5L) >> VCM Position Sensor >> Repair procedures >> Inspection

Repair procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Check the signal waveform of the VCM position sensor using the GDS.
    NOTE: In order to operate VCMA, use the actuator test function in the GDS.

    Specification:  Refer to WAVE FORM .

scientia non olet · About Mike's Workshop Manuals