Repair procedures: Installation
WARNING: This page is about a different variant/trim than selected.
NOTE:
In the case of the vehicle equipped with immobilizer, perform "Key Teaching" procedure. (Refer to TEACHING PROCEDURES
.)
- Installation is reverse of removal.
ECM installation bolt:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
ECM bracket installation bolt/nut:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)