Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2010 >> Santa Fe GLS, 2.4 B, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.4L >> Purge Control Solenoid Valve (PCSV) >> Repair procedures >> Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the purge control solenoid valve connector (A).
  3. Disconnect the vapor hoses (B) from the purge control solenoid valve.
  4. Remove the bracket installation bolt (C), and then remove the valve from the surge tank.
    Fig 1: Identifying Purge Control Solenoid Valve Vapor Hoses And Installation Bolt
    G06846872Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About Mike's Workshop Manuals