Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2010 >> Genesis 3.8 >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Immobilizer Control System >> DTCS With Programmable Interface Controller (Pic) >> P1692 Immobilizer Indicator Lamp Error >> General Description

P1692 Immobilizer Indicator Lamp Error: General Description

When driver inserts key and IGN "ON", Immobilizer informs status of system and result of Authentication by blinking of immobilizer lamp on instrument cluster, through Authentication procedure immobilizer lamp keep lighting up till engine starts. In normal status. Immobilizer lamp lights up for 30sec Right after ignition "ON". If there's any fault in immobilizer system or in Authentication, lamp blinks 5 times after ignition "ON"