System Inspection

Visually/physically inspect the following items. Repair or adjust as necessary and go to next step.
- Check that the Accelerator Cable is not sticking or moving sluggishly.
- Check Accelerator Cable free play [0.040~0.120 in. (1.0~3.0 mm)].
Remove Intake Hose and inspect Throttle Plate for excessive carbon deposits.
Is Throttle Plate being held open with excessive carbon deposits?
YES
- Replace or repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure
NO
- Go to next step as below
- Air Leakage Inspection
1. Visually/physically inspect the air leakage in intake/exhaust system as following items,
  - Check for throttle Plate being held open with excessive carbon deposits
  - Vacuum hoses for splits, kinks and improper connections.
  - Throttle body gasket
  - Positive crankcase ventilation valve for improper installation, damaged o-rings and malfunctioning.
  - Gasket between intake manifold and cylinder head
  - Seals between intake manifold and fuel injectors
  - Exhaust system between HO2S and Three way catalyst for air leakage
2. Was a problem found in any of the above areas?
  YES
  - Replace or repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure
  NO
  - Go to next step as below