Ground Circuit inspection

■ Check for open in harness 

1. Ignition "OFF"
2. Disconnect power seat slide motor.
3. Measure resistance between terminal "2" of power seat slide motor and chassis ground.

   Specification  : Approx. 0 Ω

   Fig 1: Measuring Resistance Between Terminal 2 Of power seat Slide Motor And Chassis Ground

   Courtesy of HYUNDAI MOTOR CO.
4. Is the measured resistance within specifications?

   YES 

   • Go to "COMPONENT INSPECTION " procedure.

   NO 

   • Check for open in ground harness. Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.