Charging System Test Results
CHARGING SYSTEM TEST RESULTS
| RESULT ON PRINTER | REMEDY |
|---|---|
| Charging system normal/Diode ripple normal | Charging system is normal |
| No charging voltage | Alternator does not supply charging current to battery ==> Check belts, connection between alternator and battery Replace belts or cable or alternator as necessary |
| Low charging voltage | Alternator does not supply charging current to battery and electrical load to system fully ==> Check belts and alternator and replace as necessary |
| High charging voltage | The voltage from alternator to battery is higher than normal limit during voltage regulating. ==> Check connection and ground and replace regulator as necessary |
| Excess ripple detected | One or more diodes in the alternator is not functioning properly ==> Check alternator mounting and belts and replace as necessary |