Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2009 >> Tucson GLS, Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Immobilizer Control System >> DTC P1692 Immobilizer Indicator Lamp Error >> Visual/Physical Inspection

Visual/Physical Inspection

  1. Check immobilizer lamp circuit
    1. Ignition "ON" & Engine "OFF"
    2. Check if immobilizer lamp operates properly.
      NOTE: Right after ignition "ON", Immobilizer lamp lights up for 30sec.
      NOTE: If lamp blinks 5 times after ignition "ON", there's any fault in immobilizer system.
    3. Is immobilizer lamp operates properly?

      YES 

      • Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

      NO 

scientia non olet · About Mike's Workshop Manuals