Calibration (Setting up the zero angle)
Steering Wheel Angle Sensor of a absolute angle type (CAN type) measures the angle under the standard of the zero angle set. Calibration must be performed as following cases.
- Replacement of the Steering Wheel Angle Sensor
- Replacement or repair of the Steering column
- Detection of DTC codes (C1260, C1261)
- Replacement of the sensor cluster
- Replacement of HECU
Lateral G-Sensor calibration must be performed as following cases.
- Replacement of the sensor cluster
- Replacement of HECU
- Detection of DTC code (C1283)
Pressure Sensor calibration must be performed as following cases.
- Replacement of HECU
- Detection of DTC code (C1237)