Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2009 >> Entourage Limited >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> BCM (Body Control Module) >> BCM (Body Control Module) >> DTC B2524 Stop Lamps Default Circuit Open Error >> Ground Circuit Inspection

Ground Circuit Inspection

  1. Check open in ground circuit
    1. Ignition "ON" & engine "OFF"
    2. Measure the resistance between stop lamp ground circuit (F19, F18-6, R03-2) and chassis ground.

      Specification : 0 Ω

      Fig 1: Measuring Resistance Between Stop Lamp Ground Circuit And Chassis Ground
      G05325063Courtesy of HYUNDAI MOTOR CO.
    3. Is the measured resistance within the specification?

      YES 

      Go to "COMPONENT INSPECTION ".

      NO 

      Repair open in ground circuit and go to "VERIFICATION OF VEHICLE REPAIR "

scientia non olet · About Mike's Workshop Manuals