Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2009 >> Entourage GLS >> Repair and Diagnosis >> Transmission >> Automatic Transaxle System (A5HF1) >> Automatic Transaxle System >> DTC P0760 Shift Control Solenoid Valve C Circuit Malfunction >> Monitor SCANTOOL Data

Monitor SCANTOOL Data

  1. Connect scantool to data link connector (DLC).
  2. Engine "ON".
  3. Monitor the "2nd SOL. VALVE" parameter on the scantool.
  4. Shift gear at each position.
    Fig 1: Monitor Scantool Data - Solenoid Duty
    G04880169Courtesy of HYUNDAI MOTOR CO.
  5. Does "2nd SOLENOID DUTY " follow the reference data?

    YES 

    • Fault is intermittent caused by poor contact in the sensor's and/or TCM (PCM)'s connector or was repaired and TCM (PCM) memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration or damage. Repair or replace as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO 

scientia non olet · About Mike's Workshop Manuals