Monitor SCANTOOL Data

Connect scantool to Data Link Connector (DLC).
IGN "ON" & Engine "OFF"
Monitor the "KEY STATUS"/"SMARTRA STATUS" and "ECU STATUS" Parameter on the Scantool.
Specification : 'LEARNT'

Fig 1: Monitoring Key Status SMARTRA Status And ECU Status Parameter
Courtesy of HYUNDAI MOTOR CO.

Fig. 1) The current data in normal state.
Are "KEY STATUS", "SMARTRA STATUS" and "ECU STATUS" Parameter within specifications?
YES
- Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO
- Go to "Inspection & Repair" procedure