Overhead Console Switch

1. Disconnect the negative (-) battery terminal.
2. Open the sunglass case cover from the overhead console then remove the 2 screws holding the overhead console (A). And then disconnect the connector (B).
   Fig 1: Identifying Overhead Console And Connector

   Courtesy of HYUNDAI MOTOR CO.
3. Installation is the reverse of removal.

TAIL GATE SWITCH 

1. Disconnect the negative (-) battery terminal.
2. Open the tail gate and remove the tail gate trim switch (A) using the appropriate trim tool. And then remove the connector (B).
   Fig 2: Identifying Tail Gate Trim Switch And Connector

   Courtesy of HYUNDAI MOTOR CO.
3. Installation is the reverse of removal.